How Much Does Gate Repair Cost in Florida? (2026 Price Guide)

What You'll Actually Pay

Most gate repair calls in Florida land between $185 and $650, parts and labor included. The reason for the range: a sensor cleaning and re-alignment is closer to $185, while a control board replacement on a commercial operator pushes past $600. Anything north of $1,000 usually involves a full operator replacement, not just a repair.

Below are real numbers from current invoices, not marketing fluff.

Common Repairs by Price

Photo eye replacement or re-alignment: $185–$285. The lens, the bracket, or both, plus a service call.

Remote reprogramming: $145–$185. Cheap if you already have working remotes; the labor is in the truck roll.

New remote (programmed): $95–$165 depending on brand. LiftMaster Security+ 2.0 remotes are at the top of the range.

Keypad replacement: $245–$425 depending on whether it's wired or wireless and the brand.

Capacitor replacement: $185–$285. The part is $25; the rest is diagnosis and labor.

Control board replacement: $425–$850 depending on brand. LiftMaster CSL24V boards are around $475 installed; FAAC E145 boards are closer to $700.

Limit switch replacement: $245–$385 depending on whether it's magnetic or mechanical and how accessible it is.

Bigger Repairs

Chain or belt replacement on a sliding operator: $325–$550 plus parts.

Hinge replacement on a swing gate (per hinge): $225–$485 depending on style and whether welding is required.

Roller and V-track replacement on a sliding gate: $385–$725 for parts and labor.

Hydraulic ram rebuild on a FAAC 422 or 760: $485–$725.

Motor replacement (residential operator): $625–$1,250 depending on brand.

Motor + gearbox + board (essentially an operator rebuild): pricing approaches a new operator; we'll usually recommend replacement at that point.

Full Replacement Costs

Replacing a residential single-swing operator (LiftMaster LA400 or FAAC 391 class): $1,850–$2,650 installed.

Replacing a dual swing setup: $3,200–$4,800 installed.

Replacing a residential sliding operator (LiftMaster CSL24V class): $2,400–$3,200 installed.

Replacing a commercial slide operator (HySecurity SlideDriver, LiftMaster commercial): $4,800–$9,500+ installed.

Adding access control (telephone entry, video intercom) at the same time: $1,500–$4,500 depending on system.

Emergency After-Hours Pricing

After-hours, weekend, and holiday emergency dispatch adds $95–$185 to the call. We're upfront about this when you book — there are no surprise after-hours fees added at the end.

What Drives the Price

Brand matters. LiftMaster and FAAC boards cost more than generic boards, but they last longer and don't strand you waiting on shipping. Commercial-duty parts cost more than residential parts because they're built for thousands of cycles a month.

Access matters. A gate operator on the curb takes 10 minutes to access. One buried in landscaping or wired through a wall takes longer, and that shows up in labor.

Age matters. A 15-year-old operator with a discontinued board can cost more to repair than to replace. We'll quote both options when that's the case.

What Doesn't Change the Price

We don't charge for estimates. We don't charge mileage inside our service area. We don't add fuel surcharges. The price you approve before work starts is the price on the invoice.